供应Powerworld Simulator 16 电力仿真软件

 

• itsintuitive menusfor assigning dynamic models to power system elements,
   
  
• constucting fault timelines and running the simulation,
• 
  
  
• and plotting results;
  
   
  
  

• 
  

New Add-on

• Distributed Transient Stability: extension ofDistributed Computingfeatures for parallel computation ofTransient Stabilitycontingencies

Auxiliary Files and Display Auxiliary Files

• TheSelectedfield can now be used with oneline display objects in Display Auxiliary Files.

Available Transfer Capability (ATC)

• Optimized the speed of the ATC calculations. Overall speed increase from the initial release of Simulator 15 is now between 2 and 6 times for the iterated solution methods and between 4 and 10 times for the Single Linear Step solution methods.
• Added a new Added a new option to linearize the calculation of contingency makeup power. This will precalculate the impact of makeup power on line flows at the start of the analysis and then the total effect of makeup power will be determined by multiplying the effect on a line by the Total amount of Makeup power needed. This calculation will be slightly faster than previous calculation of makeup power, but it will not take into account the fact larger amounts of makeup power may cause particular generators to hit min or max limits.
• Removed the optionApply PTDF Cutoff for Limiting Elements with Contingencies.
• Added a new option for the ATC calculation when performing the calculation on multiple scenarios. The option will allow you to specify that monitoring be done only on branches that are defined as part of the scenarios.
• Added optionAdded option to select theField to Showon the multiple scenarios results summary table.
• Modified theModified thehighlighting used and Iteratively Foundstring for better understanding of the results when using iterated methods.
• Removed the Removed theMax Iterationsoption when using the iterated methods. This is no longer necessary as oscillation prevention is handled internally.

Contingency Analysis

• Two different types of fields are now available with contingencies to list the Areas/Zones/Owners associated with the elements of the contingency. Fields exist for listing either the number or name of the associated Areas/Zones/Owners. Fields that are labeled with “recurseâ€? will look inside injection groups, interfaces, and contingency blocks for identifying the associated Areas/Zones/Owners. Fields without “recurseâ€? will not look inside injection groups, interfaces, or contingency blocks.
• Added option to use labels in contingency action descriptions. This includes actions shown in theContingency Definition listandWhat Actually Occurred. This can be useful when used with a full-topology EMS model.
• When listing contingency results by element (bus, branch, interface, nomogram interface, or custom monitor), only those elements which actually have a violation are now listed
• Specific generators, loads, and switched shunts can now be specified in addition to buses when usingMove, Set To, and Change Byactions.
• Added an optional "inclusion filter" with eachContingency Global Actions Elements. The global action will only be used with a particular contingency only if the contingency meets the inclusion filter.
• Added newCustom Monitoringto the contingency analysis tool. This allows you to setup monitoring of a field of a specific object (or all objects of a specific type) and report these fields values as limit violations in the contingency analysis. Appropriate advanced filters can also be specified so that violations are only reported if specified pre-contingency or post-contingency conditions are met.
• "Close with Breakers" action is now available. This will attempt to identify breakers that can be closed in order to energize a device rather than changing the status of the device itself.

 

File Formats

• When using thePresent Topological Differences from Base Casetool, added the ability to save the removed elements in the EPC file format using status values of -4.
• Modified the writing of GE EPC file so that Multi-Terminal DC converters will write out the "aloss" parameter in a manner consistent with how the EPCL file mtTAP.p expects to ensure the EPCL operates appropriate for WECC data files.
• When reading from an EPC file, added the reading of the area and zone designation of a GE branch and transformer.
• Added a log warning message when appending an EPC file which causes a transformer branch to be converted to a normal branch.
• When loading in EPC files and the latitude and longitude values are both zero, both entries will be ignored as invalid.
• When appending an EPC file with a scheduled voltage for a bus, the voltage setpoints for switched shunts and generators that are regulating this bus are now properly updated.
• Modified how appending an existing three-winding transformer is handled if a new three-winding transformer is entered which uses a bus number which is already used as a star bus by another transformer. This is not allowed and a new bus number will automatically be chosen.
• When appending to an existing case using an EPC file, any new branches that are created are now flagged as having just been added. This flag is then used as part of the pre-processing feature in the power flow solution to automatically estimate appropriate voltage magnitudes and angles for any existing or new buses that become newly energized.
• Modified the writing of PTI RAW files so that switched shunt records always write out at least one block. If none exists, a single block with 1 step and size equal to the present MVar output is written.
• When appending using the RAW file format, we now populate a field to say whether an object is new or modified while reading.
• Added an option when saving a RAW file to append object labels as comments to the end of data records.
• When appending to an existing case using a RAW file, any new branches that are created are now flagged as having just been added. This flag is then used as part of the pre-processing feature in the power flow solution to automatically estimate appropriate voltage magnitudes and angles for any existing or new buses that become newly energized.
• When loading the hdbexport file, modified to automatically add two labels to each transmission line. One label starts with the "from" substation name and the other label starts with the "to" substation name.
• Modified to add additional bus labels when reading the MEAS records in the Areva CSV file.
• At the end of reading in an hdbexport CSV file, if any CBTyp values were encountered that were not recognized a dialog box will appear prompting the user to designate a Branch Device Type for each CBTyp. In addition options can be specified in the Simulator Options dialog under File Management that specifies a mapping from CBTyp to Branch Device Type.
• Added options when saving a case in a PWB file to force saving the case with comments.
• Added file menu choices to open a oneline using particular linking (by Number, by Name_kV, or by Label) and then allow storing the default choice so that onelines can always default to be opened by Label or Name_kV if desired. Done to work better with full-topology cases where labels are consistent.
• Added support for EPC version 18.

General

• Modified how Simulator handles setting its Windows Operating System Priority so that the user can change this. The only exception is that while animating, Simulator always sets its Priority to Low to ensure that the animation does not interfere with other programs.
• Various dialog messages now distinguish between the various branch device types (breaker, disconnect, etc.) instead of just identifying as a branch.
• Added a graphical display to visualize the logic diagram for a Model Filter. This shows the logic diagram including AND and OR gates with the associated Model Filters and Model Conditions which are combined to give the Model Filter.
• Added a graphical display to visualize the logic diagram for an Advanced Filter. This shows the logic diagram including AND and OR gates with the associated advanced filters and conditions which are combined to give the Advanced Filter.
• Geography Tab in Bus Dialog now converts from Lat/Lon to UTM and vice versa.
• Added Voltage Source Converter (VSC) DC Lines.
• When defining Model Filters, a NOT operator is available that can be applied to each Model Condition or Model Filter that is part of the filter.

Integrated Topology Processing

• Added a new field for object types Branch, Gen, Load, Shunt, and DCLine which shows theDerived Status. For full topology power system models, this field will show whether the breakers adjacent to a device are OPEN or CLOSED. If the device is energized, the field will always show CLOSED. If the device's actual Status is OPEN, the field will alway show OPEN. If the device's actual status is CLOSED, but the device is not energized, the software will determine if any adjacent Breaker objects are CLOSED in which case the derived status will show CLOSED - otherwise it will show OPEN.
• Branches that are part of an interface will never be consolidated. In order to improve consolidation, if an interface contains a branch that can be consolidated, i.e. breaker, disconnect, etc., but it is in series with a device that cannot be consolidated, i.e. branch, load, gen, etc., the interface will be automatically modified to monitor the device in series instead.
• Added optional parameter, AddCommentsForObAdded optional parameter,AddCommentsForObjectLabels, to theSaveConsolidatedCaseThe parameter is set to NO by default. If set to YES and saving to a RAW file, object labels will be added to the end of data records. The new format of the script command is SaveConsolidatedCase(filename,filetype,[BusFormat, TruncateCTGLabels, AddCommentsForObjectLabels]).
• On several dialogs which show results of calculations for all buses in the system, an option was added to the Buses tab saying "Only show the primary bus for each superbus". This is done to reduce the number of duplicate results shown when using a full-topology model. Dialogs effected by this changed include the Limit Monitoring dialog, TLR/GSF Sensitivities dialog, Loss Sensitivities, and Flows and Voltages Sensitivities.
• Added new Branch Device Types for Fuse, Ground Disconnect, and Load Break Disconnect. The Load Break Disconnect is treated as a special switching device similar to the Breaker, so special actions such as "Open with Breakers" will automatically open load break disconnects.
• Added option toClose Breakers to Energize Switched Shunts. When using this option, breakers will be closed automatically if a switched shunt is on either Discrete or Continuous control and is required to meet the regulated voltage. This option is applied any time that the power flow is solved.
• When using theEconomic Merit Order Dispatchmethod with the PV tool and a generator is needed in the dispatch, breakers will be closed automatically to energize the generator if necessary.
• Added script commandCloseWithBreakers.

Security Constrained OPF (SCOPF)

• When using the DC-Approximation, modified the SCOPF dialog so that less messaging is sent to the SCOPF dialog regarding the progress of the SCOPF solution. All the messaging to status edit boxes on dialog was greatly slowing down the solution process.

Sensitivity Calculations

• Greatly increased the speed of calculating multiple element TLR sensitivities.
• Modified internal numerical routines to make all sensitivity calculations faster.
• Added interface fields for showing the LODF and the Post-CTG MW flow (after Line outage) values similar to those presently available for a branch.
• Previously it was only possible to open one instance of the LODF dialog at a time. This was because only one LODF result was stored so performing the calculation on one dialog changed the results on other open dialogs even if the chosen branch did not change on the other dialogs. This caused confusion and thus resulted in us restricting to one LODF dialog. This has now been modified to allow two LODF dialogs to be open simultaneously, but when doing this Simulator forces one dialog to show a "Single LODF" calculation, while the second dialog shows the "LODF Matrix". This is less confusing because the "LODF matrix" results are stored separately and thus can be displayed separately.
• Same modifi...[内容过长已截断]